New Hangar 9 1/4 Scale P 18 Super Cub
#2027
Join Date: Sep 2010
Location: Chillicothe,
OH
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Mine is still going strong...
It stays on its floats most of the time and I've learned to tolerate the evolution 33 just enough to not replace it LOL. It is a PNP outfit with the hangar 9 floats. Heavy and leak like crazy :-(. The only thing I've had an issue with is I bounced the landing on floats and had to re glue rear lower fuselage crossmember as the original glue let go. Otherwise it's been very dependable and the Monocoat holds up great compared to foam in my opinion! I'm with you on the older stuff I buy anything I can from hangar 9 or great planes ARFs on eBay!
#2031
Join Date: Nov 2002
Location: LaPorte,
TX
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
Part #
Does anybody know if the larger floats on the hanger 9 site will fit the PA18 Supercub? I contacted Hanger 9 and told me to come to this forum for the best answers considering the PA-18 is discontinued. https://www.horizonhobby.com/1-5-scale-float-set-han6030jThanks in advance. Part # HAN6030 if the link doesn't work.
Last edited by rychaross; 11-12-2019 at 05:32 PM. Reason: adding more info
#2033
Join Date: Jun 2004
Location: M.Pietrasanta (LU) - La Thuile (AO) ITALY
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
#2035
Join Date: Jun 2004
Location: M.Pietrasanta (LU) - La Thuile (AO) ITALY
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Goodmorning everyone!
I took back my SuperCub to which I had changed the engine, how many degrees does it have to be offset to the right and down? 1,5 ° / 2 °? It's correct?
I took back my SuperCub to which I had changed the engine, how many degrees does it have to be offset to the right and down? 1,5 ° / 2 °? It's correct?
#2037
Join Date: Jun 2004
Location: M.Pietrasanta (LU) - La Thuile (AO) ITALY
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts